历经10年的行业积累，威能检验已为全球多个国家的客户提供优质的检验服务.
| API Spec 5CRA | Specification for Corrosion-resistant Alloy Seamless Tubes for Use as Casing, Tubing, and Coupling Stock |
| API RP 5SI | Recommended Practice for Purchaser Representative Surveillance and/or Inspection at the Supplier |
| API RP 2SIM | Structural Integrity Management of Fixed Offshore Structures |
| API TR 941 | The Technical Basis Document for API RP 941 |
| API Std 6ACRA | Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment Second Edition [Superseded: API SPEC 6A718, API SPEC 6A718] |
| API Std 682 | Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps |
| API Std 681 | Liquid Ring Vacuum Pumps and Compressors for Petroleum, Chemical, and Gas Industry Services |
| ASTM B21 | Standard Specification for Naval Brass Rod, Bar, and Shapes |
| ASTM B171 | Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers |
| ASTM C892 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C1498 | Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials |
| ASTM C552 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C351 | Standard Test Method for Mean Specific Heat of Thermal Insulation |
| ASTM C518 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
| ASME Y14.6 | Screw Thread Representation螺纹表示法 |
| ASME PTC 10 | Compressors and Exhausters压缩机和排气机 |
| ASME BPVC XII | 2017 ASME Boiler and Pressure Vessel Code, Section XII: Rules for Construction and Continued Service of Transport Tanks 运输罐建造和延续使用规则 |
| ASME BPVC IX | ASME Boiler and Pressure Vessel Code, Section IX: Welding and Brazing Qualifications 焊接和钎焊评定标准 |
| ASME BPVC VIII-3 | ASME Boiler and Pressure Vessel Code (BPVC), Section VIII, Division 3: Alternative Rules for Construction of High Pressure Vessels ASME 第VIII卷第三册 高压容器建造规则 |
| ASME BPVC VIII-2 | ASME Boiler and Pressure Vessel Code, Section VIII, Division 2: Alternative Rules ASME第VIII卷第二册 压力容器建造另一规则 |
| ASME BPVC VIII-1 | ASME Boiler and Pressure Vessel Code, Section VIII, Division 1: Rules for Construction of Pressure Vessels ASME第VIII卷第一册 压力容器建造规则 |
| NACE SP0490 (formerly RP0490) | Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 μm (10 to 30 mil) |
| NACE SP0394 (formerly RP0394) | Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating |
| NACE TM0284 | Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking 管道、压力容器抗氢致开裂钢性能评价的试验方法 |
| NACE TM0177 | Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments H2S环境中抗特殊形式的环境开裂材料的实验室试验方法 |
| NACE MR0176 | Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments |
| NACE MR0175/ISO 15156 | Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production |
| ISO 9906 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| ISO 8503-4 | Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of |
| ISO 8503-2 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates —Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel —Comparator procedure |
| ISO 8503-1 | Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of ab |
| ISO 8502-3 | Preparation of steel Substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape met |
| ISO 8501-4 | Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
| ISO 8501-3 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| GB5908-2005 | 石油储罐阻火器 |
| GB/T9112 | 钢制管法兰 类型与参数 |
| GB/T9109.2 | 石油和液体石油产品动态计量 第2部分：流量计安装技术要求 |
| GB/T4980 | 容积式压缩机噪声的测定 |
| GB/T11352 | 一般工程用铸造碳钢件 |
| GB/T 985.2 | 埋弧焊的推荐坡口 |
| GB/T 985.1 | 气焊、焊条电弧焊、气体保护焊和高能束焊的推荐坡口 |
| JB/T8473 | 仪表阀组 |
| JB/T 10563 | 一般用途离心通风机技术条件 |
| JB/T 9244 | 玻璃板液位计 |
| JB/T 9218 | 渗透探伤方法 |
| JB/T 9092 | 阀门的检验与试验 |
| JB/T 9078.2 | 天然气分离设备 性能试验方法 |
| JB/T 9078.1 | 天然气分离设备 技术条件 |
| SY/T 10042 | 海上生产平台管道系统设计和安装的推荐作法 |
| SY/T 10041 | 石油设施电气设备安装一级一类和二类区域划分 |
| SY/T 10037 | 海底管道系统 |
| SY/T 10031 | 寒冷条件下结构和海管规划、设计和建造的推荐作法 |
| SY/T 10030 | 海上固定平台规划.设计和建造的推荐作法.工作应力设计法 |
| SY/T 10025 | 海洋钻井装置作业前检验规范 |
| SY/T 10024 | 井下安全阀系统的设计、安装、修理和操作的推荐作法 |
| NB/T 47039 | 可变弹簧支吊架 |
| NB/T 47038 | 恒力弹簧支吊架 |
| NB/T 47034 | 工业锅炉技术条件 |
| NB/T 47019.1 | 锅炉、热交换器用管订货技术条件_第1部分：通则 |
| NB/T 47018.7 | 承压设备用焊接材料订货技术条件 第7部分：钛及钛合金焊丝和填充丝 |
| NB/T 47018.6 | 承压设备用焊接材料订货技术条件 第6部分：铝及铝合金焊丝和填充丝 |
| NB/T 47018.5 | 承压设备用焊接材料订货技术条件 第5部分：堆焊用不锈钢焊带和焊剂 |
扫描二维码
关注微信公众号
